How to choose a UPS
A UPS keeps equipment running during a power outage and gives you time to shut it down or wait for the generator. This section describes how to calculate the power and which type suits your load.
- Rezervesfor home computers
- Interactivefor computers and networks
- Double conversionfor servers and sensitive equipment
- 3-5 gaditypical battery life
Power in VA and W
Add up the power in watts of all the devices you will connect and choose a UPS whose power in W is at least one third higher. The VA figure alone tells you nothing, as a 1000 VA UPS often delivers only 600 W. Compare both figures before you buy.
Laser printers and heaters are not connected to a UPS, as their short-term current can overload the device.
Runtime
The manufacturer's table shows how many minutes the UPS runs at a given load. If the load is halved, the runtime is usually more than twice as long. For most offices, 5-15 minutes is enough to finish work and shut down the computers. For a longer runtime, you need a model with additional battery packs.
Type and sine wave
A standby UPS is the cheapest and is suitable for a basic computer. A line-interactive UPS also smooths out minor voltage fluctuations, which is why it is chosen more often. A double-conversion UPS continuously generates clean voltage and is intended for servers.
For computers with an active PFC power supply, it is better to choose a UPS with a pure sine wave. A simplified (approximated) sine wave can cause switching problems with such a power supply.
Connections and management
Check the socket type, Schuko or IEC C13, and how many sockets run on battery. A USB or network connection lets the computer shut down automatically before the battery is empty, and for a server this is very important.
Maintenance
The battery usually lasts 3-5 years, less in hot conditions. Place the UPS in a cool location and check once a year whether it holds the load. Also check whether replacement batteries are available for the specific model.