Moes датчик присутствия ZSS-LP-HP02-MS
На складе
Изображения носят иллюстративный характер. Внешний вид товара и упаковки может отличаться от показанного.
The Meross CS11-EU is a smoke and carbon monoxide detector. It features two independent sensors: a photoelectric sensor for smoke detection and an electrochemical sensor for CO monitoring. The device is powered by a built-in CR123A DC 3 V lithium battery with a capacity of 1600 mAh, which is non-replaceable and has a lifespan of up to about 10 years. The alarm volume level is 85 dB(A) at a distance of 3 m. Smoke sensitivity is 0.09-0.17 dB/m. The detector meets EN14604:2005/AC:2008 and EN50291-1:2018 standards.
The device responds to CO concentrations with specific timing: 50 ppm triggers an alarm in 60-90 min, 100 ppm in 10-40 min, and 300 ppm in less than 3 min. If both smoke and carbon monoxide are detected, the device beeps for smoke first and then for CO. The mute time is approximately 10 min. Operating temperature ranges from -10°C to 40°C, and working environment humidity is 15-95% RH, no condensation. A three-color LED indicates status: green for readiness, amber for low battery or fault, and red for alarm activation or test mode. Installation involves screwing the mounting bracket to the ceiling or wall and placing the device in it.
Датчики и детекторы / Meross
27,71 €
с НДС✓ На складе
Цена и наличие проверены
27,71 € с НДС
Заметили ошибку в описании или характеристиках? Пожалуйста, напишите нам.
Список хранится только в этом браузере.